Removing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the battery.
3
Remove the
4
Remove the
5
Remove the camera.
Procedure
1
Peel off the adhesive tape to access the Windows-button board cable.
2
Lift the connector latch and disconnect the Windows-button board cable
from the Windows-button board.
computer. After working inside your
base
cover.
display
assembly.
display back-cover and antenna
After working inside your
assembly.
93