Replacing the Windows-
button board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the screw hole on the Windows-button board with the screw hole
on the display bezel.
2
Replace the screw that secures the Windows-button board to the display
bezel.
3
Slide the Windows-button board cable and the touch-board cable into
the connectors on Windows-button board and press down the latches to
secure the cables.
4
Adhere the adhesive tape to the connector on the Windows-button
board to secure the cable.
5
Turn the display-panel assembly over.
Post-requisites
1
Replace the
display back-cover and antenna assembly
2
Replace the
display
3
Replace the battery.
4
Replace the
base
92
computer. After working inside your
assembly.
cover.
After working inside your
.