KTM 690 Duke Owner's Manual page 144

16 TUNING THE ENGINE
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position and engage the gear-
ing.
–
Mount and tighten the screw.
B00997-10
Guideline
Screw, shift lever
(Duke R)
–
Loosen nut
–
Loosen nut
–
Turn threaded rod
602554-12
–
Tighten nut
Guideline
Shift rods, nut
 of the shift lever and shift shaft.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.
M6

, holding the threaded rod
Info

Nut has a left-handed thread.

, holding the threaded rod

to adjust the shift lever.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other vehicle compo-
nents during the shift procedure.

, holding the threaded rod
14 Nm Loctite
(10.3 lbf ft)

.

.

.
M6 6 Nm (4.4 lbf ft)
142
® 243™