KTM 690 Duke Owner's Manual page 106

13 WHEELS, TIRES
–
Clean screw
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
The arrow on the spoke points in the direction of motion.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
602548-10
(Duke)
–
Position wheel speed sensor
Guideline
Remaining screws, chassis
–
Position the brake caliper.
The brake linings are correctly positioned.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
602545-11
the brake disc and there is a pressure point. Fix the hand brake lever in the acti-
vated position.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
 and wheel spindle  .

.
 in the drill hole. Mount and tighten screw
 
. Mount screws

.
M10x1.25
M24x1.5 45 Nm
(33.2 lbf ft)
M6 10 Nm (7.4 lbf ft)
but do not tighten yet.
Loctite
45 Nm
(33.2 lbf ft)
104
 .
® 243™