KTM 690 Duke Owner's Manual page 107

13 WHEELS, TIRES
(Duke R)
–
Position wheel speed sensor
Guideline
Remaining screws, chassis
–
Position the brake caliper.
The brake linings are correctly positioned.
–
Position spacers
–
Operate the hand brake lever repeatedly until the brake linings are in contact with
602562-11
the brake disc and there is a pressure point. Fix the hand brake lever in the acti-
vated position.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (

in the drill hole. Mount and tighten screw
 . Mount screws  but do not tighten yet.

.
M10x1.25
M6 10 Nm (7.4 lbf ft)
45 Nm Loctite ®
(33.2 lbf ft)
p. 75)
p. 73)
105

.
243™