Page 5
Fiber Adapter Protective Cap LED Source/ Fiber Mounting Hole Release Button for Fiber Adaptor Air Vents Yoke Knob Color Selection Knob Intensity Knob On/ Off Switch Hand Holder DC Power Input Jack Yoke Light Stand Adapter...
Page 7
Insert Fiber into Fiber Mounting Hole (C) . Slightly rotate until clicking into place. Insert the DC power plug into P200 FlexJet DC Power Input Jack (K). Press On/Off Switch (I) to turn on P200 FlexJet. Tighten Yoke Knob (F) to lock the P200 FlexJet in place.
Specifications Size 4” (Diameter) x 7.8” (Length) Weight (Includes Yoke) 2.8 lb / 1.29 kg Dense Matrix LED Thermal Design Advanced Vapor Cooling System 3000K White/4300K White/5600K White Color Selections Magenta/Yellow/Aqua/Cyan/Blue CRI (for Whites) >90 Power Consumption 60W Max. Input 12 to 28 V DC AC Adaptor 100-240V AC, 50/60Hz (In) / 24V DC , 90W max.
For Your Safety • Do not attempt to disassemble the body of P200 FlexJet. • Do not install P200 FlexJet in a damp or wet area. • Do not cover the side and back air vents. • Use only the included power supply.
It is necessary to obtain a Return Authorization Number (RA#) from your dealer/ point of purchase BEFORE any units are returned for repair. Fiilex will make the final determination as to whether or not the unit is covered by warranty. Fiilex will replace or repair to proper working condition any products that are returned under warranty.
Page 11
Any Product unit or part returned to Fiilex must be packaged in a suitable manner to ensure the protection of such Product unit or parts. The package must be clearly and prominently marked to indicate that the package contains returned Product units or parts with a Return Authorization (RA#) number.