Advertisement
Mount Light Stand Adapter(M) to spigot on light stand or tripod.
1
Insert Fiber into Fiber Mounting Hole (C) .
2
Slightly rotate until clicking into place.
3
Insert the DC power plug into P200 FlexJet DC Power Input Jack (K).
4
Press On/Off Switch (I) to turn on P200 FlexJet.
5
Tighten Yoke Knob (F) to lock the P200 FlexJet in place.
6
Use the Color Selection Knob (G) to set the P200 FlexJet to a
7
desired color.
Adjust the Intensity with Intensity Knob (H).
8
* Note : Fiber is sold separately
2
3
5
Advertisement
