Advanced; Events; Maintain; Load Default - Defender 21000 Series User Manual

Advanced

Adjust the device alarms for disk errors, video loss, or when your HDD is full.

Events

To enable alarm settings:
1. Select the drop down menus to select whether
the DVR alarm will sound when the HDD is low on
memory or is not working properly or if there is
video loss.
2. Select the Enable checkbox to turn on the alarm
for the specific issue.
3. Select the drop down box next to buzzer to select
the buzzer length.

Maintain

To turn auto maintenance on or off:
1. Select the Maintain tab.
2. Select the drop down box next to Auto Reboot
and select Enable or Disable.

Load Default

Loading default settings will restore all settings on your DVR to the default settings except your passwords
and time adjustments.
1. Highlight and select load default.
2. Check the boxes where you would like the
settings restored.

Firmware Update

1. Highlight and select Firmware Update.
2. Select the path to where you have saved the
firmware once downloaded.
3. Select the start button.
ONLINE SOFTWARE
4. Select the Show Message checkbox if you would
like a message to be displayed on your monitor
when motion has been detected.
5. Select the Send Email checkbox if you would
like an email alert when motion is detected. You
must have email notification set up to
receive alerts.
6. Select save to save settings.
3. Input the date and time with the drop down
boxes when you would like the reboot
to happen.
4. Select save to save your changes.
3. A screen will appear asking "Are sure you want
to restore the DVR to the default settings".
4. Once loaded, the factory default settings will
be set.
73