Zoom; Record Search; Start / Stop Record; Start/ Stop Rotate - Defender 21000 Series User Manual

Zoom

When viewing a camera in full screen mode, your function toolbar gives you an option to zoom in. This
function allows you to get a better view of what you are monitoring. To zoom follow these steps:
1. Double click the screen you would like to zoom
in on. This will open to full screen mode.
2. Right click the mouse, scroll to ZOOM
and press select.
3. Using the mouse, click and drag a square
around the area you would like to zoom in on.

Record Search

This shortcut prompts the video search menu to appear. It allows you to search through the previously
recorded footage. For more information on the video search menu, please see the PLAYBACK section of
this manual.

Start / Stop Record

This shortcut prompts the DVR to start or stop recording. This function works if the DVR's schedule is set to
MOTION RECORD and you would like to record in between motion detection events.

Start/ Stop Rotate

1. Right click the mouse and select START ROTATE
The cameras will then start sequencing through.
2. To stop auto sequence, double click the screen
or open the function TOOLBAR and select the
STOP ROTATE ICON.

PIP Mode

Picture in picture (PIP) mode
channels (of your choice) as smaller screens in either corner of the screen. You must have at least one
camera connected to your DVR for PIP mode to function properly. To turn on PIP mode follow these steps::
1. Right click and then select PIP Mode 1x1 or PIP
Mode 1x2.
2. 1x1 allows you to view camera one in full screen
and another camera in the lower left corner of
the screen.

Volume

If you have connected audio-enabled cameras to the DVR you can adjust the level of sound or mute all
noise being recorded. Select the volume icon in the FUNCTION TOOLBAR. You can adjust the volume level
using the bar or mute by checking the mute box. Select the save disk icon
4. Once the square has been set, release the
5. To exit the zoomed in screen, right
. 3. To return to quad, 9, or 16 screen view, open the
/ allows you to view camera one in full screen and up to two camera
3. 1x2 allows you to view camera one in full screen
4. To exit PIP mode, right click the mouse.
FUNCTION TOOLBAR
mouse button and the screen will zoom in on the
selected area.
click the mouse.
function TOOLBAR and select the SPLIT screen icon.
and two other cameras in the bottom left and
right corners of the screen.
to save your settings.
17