Table of Contents
Advertisement
2.2 BACK PANEL
NO.
LABEL
1
2
VIDEO INPUT
3
MONITOR OUT
4
AUDIO OUT/ IN
5
ETHERNET
RS-485/ ALARM/
6
RELAY
7
VGA D-SUB OUT
8
POWER
NOTE: Please plug in the supplied mouse to DVR mouse connector before turn on the
DVR. DO NOT REMOVE and PLUG IN the supplied mouse while DVR is
operating.
2.3 ADVANCED AUTO SWITCH, ZOOM, PTZ, COPY KEY CONTROL & USB
INFORMATION
AUTO SWITCH : In the split screen mode, use the "QUAD+
ZOOM :In the full screen mode, user can use compound key " ENTER/ COPY " on the
front panel to perform ZOOM function. Press ▲▼◄►, located on the front
panel, to move the zoom window.
PTZ : When camera supported PTZ function, user can use "
panel to perform PTZ function. Press ▲▼◄► to select and change setup value.
COPY : Within the playback mode, press " ENTER/ COPY " button to start backup
record and press " ENTER/ COPY " again to end backup. The user can see the
backup image approx. 3 ~5 sec.
USB INFORMATION: Within the LIVE VIEWING, press "ENTER" key in the front
USB Mouse Connector (Only by supplied mouse).
Video input with BNC connector.
Video output with BNC connector.
Audio output/ input.
RJ-45 connector for network.
4 pin connector for external control unit, 5 pin connector for
Alarm input and 3 pin connector for relay
Connect to CRT or LCD monitor.
Power switcher: DC 12V 5A / 50-60 Hz input.
panel to enable auto switch function. Moreover, press "
again to disable it.
panel will present the USB information. (NOTE: Please
confirm that USB Device has plugged into DVR.)
OPERATION
9
" keys in the front
" key
" button on the front
Advertisement
Table of Contents
