Removal and Replacement Procedures
Video Board
To remove the video board:
1. Power down the server. Refer to "Powering Down the Server" ea rlier in this chapter.
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" earlier in
this chapter.
3. Remove the access panel. Refer to "R emoving the Access Panel" earlier in this chapter.
4. Remove the video board.
Figure 2-25: Removing the video board
Reverse the steps to replace the video board.
2-26
HP CONFIDENTIAL Codename: eliXir Part Number: 361543-001 Last Saved On: 3/11/04 3:21 PM
HP ProLiant DL145 Server Maintenance and Service Guide