Signal Interface Board - HP ProLiant DL145 Maintenance And Service Manual

Signal Interface Board

To remove the signal interface board:
1. Power down the server. Refer to "Powering Down the Server" ea rlier in this chapter.
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" earlier in
this chapter.
3. Remove the access panel. Refer to "R emoving the Access Panel" earlier in this chapter.
4. Remove the signal interface board.
Figure 2-28: Removing the signal interface board
Reverse the steps to replace the signal interface board.
HP ProLiant DL145 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: eliXir Part Number: 361543-001 Last Saved On: 3/11/04 3:21 PM
Removal and Replacement Procedures
2-29