Removal and Replacement Procedures
To remove a DIMM:
1. Power down the server. Refer to "Powering Down the Server" ea rlier in this chapter.
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" earlier in
this chapter.
3. Remove the access panel. Refer to "R emoving the Access Panel" earlier in this chapter.
4. Remove the DIMM.
Figure 2-5: Removing a DIMM
Reverse steps to replace a DIMM.
2-8
HP CONFIDENTIAL Codename: eliXir Part Number: 361543-001 Last Saved On: 3/11/04 3:21 PM
HP ProLiant DL145 Server Maintenance and Service Guide