Power Supply - HP ProLiant DL145 Maintenance And Service Manual

Power Supply

To remove a power supply:
1. Power down the server. Refer to "Powering Down the Server" ea rlier in this chapter.
2. Extend the server from the rack. Refer to "Extending the Server from the Rack" earlier in
this chapter.
3. Remove the access panel. Refer to "R emoving the Access Panel" earlier in this chapter.
4. Remove the PCI-X riser cage. Refer to "R emoving the PCI-X Riser Cage" earlier in this
chapter.
5. Disconnect the power cord from the power supply.
6. Remove the power supply.
Figure 2-22: Removing the power supply
Reverse the steps to replace the power supply.
HP ProLiant DL145 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: eliXir Part Number: 361543-001 Last Saved On: 3/11/04 3:21 PM
Removal and Replacement Procedures
2-23