Important Safety Instructions; For Safety During Operation; For Safety When Servicing Or Maintaining Machine - Minuteman scv 24 Operator's Manual

Operators must read and understand this manual before operating or maintaining this
machine.
Do not operate this machine in flammable or explosive areas.
This machine is designed solely for scrubbing dirt and dust in an indoor environment. Minuteman
does not recommend using this machine in any other capacity.
The following information below may cause a potential hazard to the operator and equipment.
Read this manual carefully and be aware when these conditions can exist. Take necessary steps to
locate all safety devices on the machine and train the personnel operating the machine. Report any
machine damage or faulty operation immediately. Do not use machine if it is not in proper
operating condition.

FOR SAFETY DURING OPERATION:

Keep hands and feet clear of moving parts while machine is in operation.
Make sure all safety devices are in place and operate properly. All covers, doors and latches must
be closed and fastened before use.
During operation, attention should be paid to other persons in the work area and especially if
small children are present.
Electric motors and components can cause an explosion when operated near explosive materials
or vapor. Do not operate this machine near flammable materials such as solvents, thinners, fuels,
grain dust, etc.
Store or park this machine on a level surface only. To prevent unauthorized use, machine should
be stored or parked with the key removed.
This machine is designed for level operation only. Do not operate on ramps or inclines.
This machine is not suitable for picking up hazardous dusts.
Use caution when moving this machine into areas that are below freezing temperatures. Any
water in the tanks or hoses can cause damage to the machine.

FOR SAFETY WHEN SERVICING or MAINTAINING MACHINE:

Stop on level surface.
Disconnect the power to the machine by pressing the Red Emergency Disconnect Button when
charging batteries or during installation or removal of brushes.
Avoid moving parts. Do not wear loose jackets, shirts, or sleeves when working on machine.

IMPORTANT SAFETY INSTRUCTIONS

4