After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
It may take several seconds to update the region location on video display after
pressing Apply!
3.9.3 Audio
The Audio section is available only for audio-supported models. The user interface for audio
control looks like below:
Parameters
Audio In
Audio Out Volume
Audio Format
3.10 Event
This section describes how to setup the Event Handler, which deals with how the IP devices
respond to situations. Each IP device can have a maximum of 10 Event Rules. Each rule
includes one single trigger, and one or many responses. Several types of responses are
available. And there are multiple external servers for the device to interact with.
When setting up Event Handler, there are four types of settings. Event Server, Event
Configuration, Event List and Manual Event
Click the
item before Event to expand the list.
Description
The option "Enabled" would activate incoming audio (either line in or
built-in microphone). The option "Disabled" would turn off the
incoming audio. In such case, the video stream is captured without
audio.
The audio out volume level can be adjusted in the scale of 0-100. It
will influence the volume level of the speakers connected to the
camera.
Choose the compression format of audio: PCM, G.711A (A-law) or
G.711U (µ-law).
61
5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V