Port Mapping - Planet Networking & Communication ICA-E5550V User Manual

Netmask, then you should use 255.255.255.255, and it will affect only a single IP address per
line of entry, or use 255.255.255.0 to use the same setting for all IP addresses starting with the
same three numbers. .
After changing any of the items above, press Apply to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.
Do not accidentally block your own IP address that you are connecting from;
otherwise you will not be able to access the camera any more to undo the
changes. If this happens by mistake, you can do the hardware reset – it will clear
all the filtering rules.

3.7.2 Port Mapping

The section Port Mapping provides the list of services and protocols that require their own
port number for communication. By default, the camera already has all the ports defined. On
this page, the user can modify the port numbers in case there is a specific need for that. Most
often, the HTTP port is changed to something other than 80 in order to match with
easy-to-remember port forwarding rules of the router that acts as a bridge between local area
network and Internet.
Some items appear only if the camera model supports the function.
Parameters
HTTP port
HTTPS Port
Search Server Port1
Select the port assigned for HTTP protocol access.
Select the port assigned for HTTPS protocol access.
Select the first port used by server search applications to detect
this IP device (e.g. IP Utility).
35
5 Mega-pixel Vandalproof IR PoE IP Camera
Description
ICA-E5550V