Table of Contents
Advertisement
5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
To disable the ONVIF support, remove the check mark from the check box and press Apply.
If you need to activate ONVIF on multiple cameras conveniently, you may use the IP Utility
instead, using system cgi and ONVIF_STATE=1 as URL command.
3.8 IP Settings
The IP Settings section provides the options to define how the camera would obtain its IP
address; and to which DNS server should the camera connect, in order to resolve domain
names.
3.8.1 Connection Type
The Connection Type allows defining the method of obtaining the IP address of the camera.
By default, the camera is in Dynamic IP Address mode and attempts to get the IP address
from a DHCP server. If such attempt fails after several seconds (for example the DHCP server
does not exist), the camera will automatically assign itself an IP address, listed under the Static
IP Address.
Host Name is used to identify the camera by a DHCP server. In some networks with very strict
security policy, it is required that all the network devices should have their host name, and
when the devices attempt to access the network by requesting an IP address from a DHCP
43
Advertisement
Table of Contents
