Table of Contents
Advertisement
5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V
3.7 Network
The section Network provides the list of network related functions and services. The [+] mark
before Network indicates that the list can be expanded by clicking on it. Once expanded, the
list can later be collapsed again by clicking on the [-] mark.
3.7.1 IP Address Filtering
By "IP Address Filtering" function it is possible to define which devices (their IP addresses)
are allowed to connect to this camera, and which devices are forbidden to connect to this
camera.
Check the box "Enabled" to activate the IP address filtering function and press Apply.
Below you can select either "Allowed" or "Blocked" list to add items there and Enable them with
the checkbox behind each row.
"Allowed" mode will refuse access to all IP addresses except the ones listed below.
"Blocked" mode will accept all incoming access except the IP addresses listed below.
Using Netmask (Subnet Mask) allows you to set filtering for a whole range of IP address at
once, without the need to enter all of them individually. If you are not sure about the function of
34
Advertisement
Table of Contents
