Firmware Upload; Save & Reboot; Logout - Planet Networking & Communication ICA-E5550V User Manual

5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E5550V

3.11.4 Firmware Upload

The Firmware Upload section allows remote upgrade or downgrade of camera firmware. The
upgrade to newer version is usually done in order to gain new functions or fix existing bugs or
limitations while downgrade to older version is used mostly for integration purposes where the
newly purchased camera model comes with the newer firmware version than supported by a
third party video management system of a given project.
The firmware image file can be downloaded from the website. It has the file extension ".upg".
After pressing Apply button, it is possible to browse for firmware image file that has already
been downloaded to the computer that has the Web Configurator running.
Click Browse to select the upload image file. Click the Apply button to start the upload.
Once the process is finished, you will get an "OK" message and system will reboot itself.
3.11.5 Save & Reboot
The Save & Reboot section allows saving the settings and rebooting the camera remotely.
This is critical because some settings might not take effect before save & reboot.

3.11.6 Logout

Clicking this item allows you to log out of the IP device. Be sure to logout this IP device once
you have completed all the tasks via Web Configurator.
76