2.4.2 Configuring Network by PLANET IP Wizard II
In case you want to change the IP related parameters of wired interface, please select the
Internet Camera you want to configure and click the LAN button. Related settings will be
carried out as shown below.
In case, you do not want to change username and/or password, then just click the
button to perform your setting accordingly. Click the
page.
If you like to change username and/or password of the device, just click the check button. Then,
the related fields will show up as shown below.
60fps Full HD IR IP Camera with Remote Focus and Zoom
"<<"
button to go back to the previous
ICA-4210P
"Submit"