Table Of Contents - Flavel Windsor Installation, Maintenance And User Instruction

Section 1 Information and Requirements
1.0 Appliance Information
1.1 Conditions of Installation
1.2 Flue and chimney suitability
1.3 Fireplace / surround suitability
1.4 Shelf position
1.5 Chimney inspection
1.6 Fire place opening / catchment space
1.7 Fitting to Chair bricks
1.8 Precast Flues
1.9 Metal Flue boxes
1.10 Hearths
1.11 Spillage Monitoring System
Section 2 Installation of Fire
2.1 Unpacking the fire
2.2 Installing the fire box
2.3 Gas tightness and burner pressure
Section 3 Assembling Fuel Bed and Commissioning
3.1 Assembling the ceramics and fuel bed (Coal models)
3.2 Assembling the ceramics and fuelbed (Pebble models)
3.3 Assembling the ceramics and fuelbed (Driftwood models)
3.4 Fitting the Trim
3.5 Fitting the Fret
3.6 Lighting the appliance
3.7 Checking for clearance of combustion
products
Section 4 Maintenance
4.1 Removal of the Burner Assembly
4.2 Removal of the Piezo Igniter
4.3 Removal of the Control Tap
4.4 Removal of the Thermocouple
Section 5 User Instructions Section
5.1 Conditions of Installation / About Your New Gas Fire
5.2 Operating the Fire
5.3 Assembling the Coal Fuelbed
5.4 Assembling the Pebble Fuelbed
5.5 Assembling the Driftwood Fuelbed
5.6 Cleaning the Fire
This appliance is manufactured by :-
CFM Europe Ltd.
Trentham Lakes,
Stoke-on-Trent,
ST4 4TJ
Supplied By www.heating spares.co Tel. 0161 620 6677
CONTENTS
2
PAGE
3
4
4
5
5
5
6-7
8
8
8
9
9
10
10
15-16
16-18
18-19
20-25
26
26
27
27-28
29
29
30
30
31-32
33
34-35
36-37
38-43
44