Cfm Europe Ltd - Flavel Windsor Installation, Maintenance And User Instruction

Removal / Re-fitting of the Fret & Ashpan Cover
a) Remove the fret & ashpan cover from the packaging.
b) Place fret up to the front radiused section of the fuelbed, taking care
not to move coal positions.
c) Place ashpan cover under fret assembly and centralise.
NOTE : Some models in this range are not supplied with a fret from the
factory, therefore please consult your local retailer for fitting
advice on the type of fret supplied with these models.
USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed components and
coals or pebbles which may be replaced as described in the above section.
Replacement of any other parts must be carried out by a competent person such
as a CORGI registered gas installer. The part numbers of the user replaceable
parts are as follows, these are available from CFM Europe Ltd. who may be
contacted at the number on the rear cover of this book.
Coal Pack B-67050
Pebble Pack B-68240
Driftwood Fuelbed Matrix B-81160
Due to our policy of continual improvement and development the exact
accuracy of descriptions and illustrations cannot be guaranteed.
Telephone - General Enquiries :
Telephone - Service :
Supplied By www.heating spares.co Tel. 0161 620 6677
Coal Fuelbed Matrix
Pebble Fuelbed Matrix
Driftwood Pack
Part no. B-67170
Issue 8

CFM Europe Ltd.

Trentham Lakes
Stoke-on-Trent
Staffordshire
ST4 4TJ
(01782) 339000
(08700) 101187
B-67040
B-68230
B-81170