Table of Contents
Advertisement
Step 3. Select the correct encryption method and enter the security key. Then, click "Connect".
Step 4. Check "Add to Wireless Profile" and click "Reboot Now".
Step 5. Go to "Management-> Status" page to check whether the state of Repeater interface should be
"Connected".
Figure 5-22 5GHz Universal Repeater-2
Figure 5-23 5GHz Universal Repeater-3
Figure 5-24 5GHz Universal Repeater-4
-35-
User Manual of WDAP-C7200AC
Advertisement
Table of Contents
