Table of Contents
Advertisement
screws.
※ IEEE 802.3at PoE switch is required.
Step 3. Plug the RJ-45 Ethernet cable into the PoE port of the WDAP-C7200AC.
Step 4. Load the device into the mounting bracket, and be sure the device is mated with two fixed screws.
Then, rotate the device clockwise to lock it in position.
Figure 3-2 WDAP-C7200AC Installation Diagram 2
Figure 3-3 WDAP-C7200AC Installation Diagram 3
User Manual of WDAP-C7200AC
-13-
Advertisement
Table of Contents
