Sensing Angle And Distance Test - KeepGuard KG760EB Instruction Manual

back of the KeepGuard Cam. Thread one plastic buckle part onto each end of
the belt. Fasten the belt securely around the tree trunk by clicking the buckle
ends together after tightening the belt so there is no slack left.
Fig. 5: Attaching the Belt
Using the tripod socket : The camera is equipped with a socket at the bottom
end to enable mounting on a tripod or other mounting accessories with a
standard 1/4-20 thread.

Sensing Angle and Distance Test

To test whether the KeepGuard Cam can effectively monitor the area you
choose, this test is recommended to check the sensing angle and monitoring
distance of the KeepGuard Cam. To perform the test:
· Switch the KeepGuard Cam to the SETUP mode.
· Make movements in front of the camera at several positions within the area
where you expect the game or subjects to be. Try different distances and
angles from the camera.
21