Table of Contents
Advertisement
MOUNTING AND POSITIONING the KEEPGUARD CAM
Mounting
After you've set up the camera's parameters to your personal preferences at
home or in your truck, you're ready to take it outside and slide the power switch
to "ON". When setting up the KeepGuard Cam for scouting game or other
outdoor applications, you must be sure to mount it in place correctly and
securely. We recommend mounting the KeepGuard Cam on a sturdy tree with
a diameter of about 6 in. (15cm). To get the optimal picture quality, the tree
should be about 16-17 ft. (5 meters) away from the place to be monitored, with
the camera placed at a height of 5-6.5 ft. (1.5~2 m). Also, keep in mind that
you will get the best results at night when the subject is within the ideal flash
range, no farther than 45' (14m) and no closer than 10' (3m) from the camera.
There are two ways to mount the KeepGuard Cam: using the provided
adjustable web belt, or the tripod socket.
Using the adjustable web belt: Fig. 5 illustrates using the web belt on the
KeepGuard Cam. Push one end of the belt through the two brackets on the
oddly and you think you may have
changed
the
setting
accidently (but aren't sure which one), this
will reset all parameters to their most
commonly used or "generic" settings.
20
for
something
Advertisement
Table of Contents
