Table of Contents
Advertisement
menu. MENU can also be pressed anytime you want to cancel changing a
parameter's setting after a new setting has been selected (but OK has not
been pressed yet). After setting the parameters to your preferences, be sure to
move the switch to ON to begin actually taking photos or videos. No images
will be captured if the switch is left in the SETUP position (unless you press the
RIGHT/Shot key after exiting the menu) - in fact, the camera will power off
automatically after a few seconds with no key pressed.
EXAMPLES - Changing the Settings of Some Common Parameters
Following this page, you will find tables listing all of the parameters found in the
SETUP Menu, along with their possible settings (or range of settings), and a
detailed description of what the parameter controls and what the settings do. If
you read the previous section detailing how to select parameters and change
their settings, you should be able to dive right in, find the parameter(s) you
want, and setup the camera to your preferences. But maybe you'd rather walk
through an example or two first:
To change any parameter's setting, always start with the power switch in the
SETUP position. After the LCD comes on, press the MENU key.
The first parameter you will see when you first enter the SETUP Menu is
"Mode". To change it from its default setting of 〞Camera〞 (still photos)
to 〞Video〞 (shoot video clips), press the DOWN key to highlight 〞Video〞
(color viewer models). Press the OK key to "execute" (Set) the new setting
14
Advertisement
Table of Contents
