Baxi LINA 3 COMFORT HT Instruction Manual page 54

Press +/- to adjust the duration of the function, the adjustment step is 10 minutes. Duration ranges from 10 minutes
to a maximum of 45 days.
Press + after 90 minutes, HH 02 appears on the display:
In this case, the time is considered in hours. Duration ranges from 2 to 47 hours.
Press + after 47 hours, DD 02 appears on the display:
In this case, the time is considered in days. The duration ranges from 2 to 45 days (the adjustment step is 1 day).
• press OK to enable the function and exit the programming mode.
WARNING
after enabling this function, make sure not to press any other button. If one of the buttons on the climate controller is
pressed, in fact, the manual function may be enabled (
interrupted. In this case, repeat the function enable procedure as described at the beginning of this section.
4.4.2 TIMED MANUAL MODE (PARTY)
This function is used to set a temporary ambient temperature. After this period, the operating mode returns to the pre-
viously set one.
To enable the function, proceed as follows:
and set the "MAN" function (symbol
• press
• press , MM 60 appears on the display and
• the duration of the function is adjusted as described in section 4.4.1.
• to modify the ambient temperature, press OK ("AMB" appears on the display) and then +/-
• press OK to enable the function and exit the programming mode.
INSTRUCTIONS FOR USERS
In this example, the function lasts 60 minutes.
flashes on the display) and the "Timed shutdown" function is
);
flashes.
54
.
926.420.3 - EN