Baxi LINA 3 COMFORT HT Instruction Manual page 49

Condensing gas wall-hung boilers
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 44
3.4 AMBIENT TEMPERATURE AND DHW TEMPERATURE ADJUSTMENT
Adjust the ambient temperature
When the burner is lit, the display shows the symbol
HEATING
While the boiler is operating in the heating mode, the display shows the symbol
figure 1). During manual ambient temperature adjustment, the display shows "tAMB".
DOMESTIC HOT WATER
While the boiler is operating in the DHW mode, the display shows the symbol
figure 1). During manual DHW temperature adjustment, the display shows the "HW SP".
N.B.:
If a storage boiler is connected, while the boiler is operating in the DHW mode, the display shows the symbol
and the ambient temperature (°C).
3.4.1. Climate controller installed in the boiler
If the climate controller is installed in the boiler, press
DATE-TIME SETTINGS
Press IP: the display shows PROG (for a few seconds) and the hour starts flashing.
N.B.:
if no button is pressed, the function automatically stops after about 1 minute.
+/-
• Press
to adjust the hours;
• Press OK;
+/-
• Press
to adjust the minutes;
• Press OK;
+/-
• Press
to set the day of the week "Day"
(1...7 corresponding to Monday...Sunday);
Press IP to exit DATE-TIME settings.
To enable hourly programming in the heating mode, press
display).
Hourly programming allows you to set the automatic boiler operation in the heating mode during determined time
bands and determined days of the week.
Boiler settings can be made for single days or for groups of consecutive days.
3.6.1. Single days
4 time bands are available every day (4 boiler switching on and switching off cycles in the heating mode, with times
that can differ from day to day), as indicated in the following table:
INSTRUCTIONS FOR USERS
and the DHW temperature
) as described in section 3.1.
+/-
3.5 PROGRAMMING (PROG)
3.6 HOURLY PROGRAMMING IN HEATING MODE
, by pressing the respective
and the ambient temperature (°C) (see
and the ambient temperature (°C) (see
to adjust the delivery temperature of the heating system water.
(the symbol
49
+/-
buttons (figure 1).
appears on the climate controller
926.420.3 - EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents