Baxi LINA 3 COMFORT HT Instruction Manual page 50

MONDY DAY 1
TUEDY DAY 2
WEDDY DAY 3 (Wednesday)
THUDY DAY 4 (Thursday)
FRIDY DAY 5
SATDY DAY 6 (Saturday)
SUNDY DAY 7
To set a single time band, proceed as follows:
1) press IP and then
2) select a day of the week (1...7) by pressing
repeatedly
;
3) press OK;
4) the display shows on 1 and the four time digits start flashing, as
shown in the following figure;
+/-
5) press to set the boiler switching on time;
6) press OK;
7) the display shows of 1 and the four time digits start flashing;
+/-
8) press to set the boiler switching off time;
9) press OK;
10) repeat the operations from point 4 onwards to set the remaining
three time bands;
11) press IP to exit the function.
N.B.:
If switching on time on... is set at the same time as switching off time of..., the time band is cancelled and the
programme moves on to the next time band.
(e.g. on1=09:00 – of1=09:00. the programme "skips" time band 1 and continues to on2...).
3.6.2. Groups of days
This function allows you to programme 4 shared boiler switching on and switching cycles for several days or for the whole
week (see summary below).
INSTRUCTIONS FOR USERS
On 1 Of 1
(Monday)
(Tuesday)
06:00 08:00
(Friday)
(Sunday)
;
Programming in
HEATING
FACTORY SETTINGS
On 2 Of 2 On 3
11:00 13:00 17:00
+/-
PROGRAMMED TIME BAND
09:00 - 12:00
50
Of 3 On 4 Of 4
23:00 24:00 24:00
Day of the Week
MONDAY
926.420.3 - EN