Advertisement
ASSEMBLY INSTRUCTIONS
HOW TO USE APPLIANCE
CAUTION: Open lid with caution during
use. Grill is HOT and will release heat.
7
Step 1
Align holes in middle post (4) with
holes in base (5) and secure with
bolts (14).
Step 2
Align holes in grill head/upper post
(3) with holes in middle post and
secure with bolts (14).
Step 3
Place grill rack on top of internal
base pan.
Step 1
Plug control unit (10) into base pan
(3).
Step 2
Turn controller to OFF
position before
plugging power supply
into 110 volt wall outlet.
Step 3
Set desired temperature range on
control unit.
Step 4
Place food onto grill rack.
The lid can be opened or closed
while cooking.
TROUBLESHOOTING GUIDE
SYMPTOM
Power light won't
Not plugged into outlet Check outlet connection
come on.
Control unit cord not
plugged into base pan
House fuse tripped
Controller
malfunctioning
Unit takes excessive
Unit plugged into an
extension cord
amount of time to heat
up, (longer than 15-20
Lid not in place
min) or not enough heat
Controller malfunctioning
Controller does not
Not plugged into wall
adjust heat
Control unit cord not
plugged into base pan
Controller malfunctioning
Grill reaches extremely
Temperature setting too
high temperatures
high
Controller/element
malfunctioning
Frequent flare-ups
Cooking fatty foods
Grease build-up
Controller
Power light is on, unit
malfunctioning
isn't heating
Faulty element
CAUSE
POSSIBLE SOLUTION
Check unit connection
Make sure other
appliances are not
operating on the same
electrical circuit. Check
household fuses
Contact Masterbuilt at
1.800.489.1581
Set unit so an extension
cord does not have to be
used
Close lid to retain heat in
unit
Contact Masterbuilt at
1-800-489-1581
Check wall connection
Check unit connection
Contact Masterbuilt at
1-800-489-1581
Adjust controller to lower
setting
Contact Masterbuilt at
1-800-489-1581
Use low temperature
setting with lid open
Clean internal base pan
Contact Masterbuilt at
1.800.489.1581
Contact Masterbuilt at
1.800.489.1581
4
Advertisement
