Table of Contents
Advertisement
5. INSTALLATION
5-1 Installation environment
To ensure proper performance and long operating lifetime,
follow the recommendations below when choosing a location
for installing the APxG5.
Make sure the inverter is protected from the following condi-
tions.
Ambient temperature : -10
latory condition.
No rain, moisture.(For enclosed wall-mounted type)
Less dust, oil sprays, metal bits.
No erodent.
No direct sunshine, (Avoid using outdoors.) High
temperture and falling dust.
No vibration and Low EMI with electric power.
Easy to maintain and inspect.
5-2 Installation
1. Install the unit always vertically with at least 15cm marginal
spaces around.(See the diagram below)
2. If installation have unscure position, place a board under
inverter before install it. Otherwise, the main circuit may be
damaged.
3. Installation environment must on nonflammable material
such as the steel sheet.
~ 45
℃
℃
11
and a good venti-
Hide quick links:
Advertisement
Table of Contents
