Installation - Adleepower MS Series Instruction Manual

4. INSTALLATION

Inadequate environment around installation site and installation
surface can result in damage to the inverter.
Before operating the MS series inverter, please check the following
points :
(1) Avoid high temperature, high humidity, easy-to-dew ambient envi-
ronment. Don' t expose to dust or dirt, corrosive gas, and coolant
mist, and direct sunlight. Place the unit in a well-ventilated room.
(2) Avoid a place subjected to substantial vibration.
(3) When installing the unit within the cabinet. Please pay attention to
ventilation and limit the ambient temperature in between -10
45 . (14
℃ ℉
(4) Use a nonflammable material, such a steel sheet on the wall for
installation. (The rear side will generate heat)
(5) Install the unit always vertically with a marginal spacing around.
6 cm
~ 113 ).
℉
6 cm 4 cm
AIR FLOW
8
~
℃