Expert Setting; Operating Methods; Manual Flight Control (Take Mode 1 As Example); Gravity Sensor Control When Flying - Walkera W100S User Handbook Manual

CXDOCICOCD©
C>00 - D CDC)CDCD
08
WK-REMOTE
software
control
zoco
2_AIGHz
(3) Reset: When touch this Reset icon, all settings will be reset to the factory original setting.
(4) Reverse setting: Elevator, Aileron, Throttle, Rudder, Gyro, Pitch and so on, all of them are normal. Unselected
symbol is gray means normal options, selected the symbol is colorful means reverse setup.
8.4.2 Expert setting: It doesn't need any Expert setting.
8.5 Operating methods
8.5.1 Manual flight control (take Mode 1 as example)
(1) Throttle stick control: Press and hold the throttle
control ball and then pushed up, the motor rotates,
the higher it push, the faster the motor will rotate(fly
higher); The motor will slow down when push down,
the lower it push, slower the motor rotates.
(2) Aileron stick control (left and right): When moving
the AILE control ball left, the UFO accordingly flies
left; When moving the AILE control ball right, the
UFO accordingly flies right.
(3) Elevator stick control(forward and backward):
When moving the ELEV control ball up, the UFO
accordingly flies forward; When moving the ELEV
control ball down, the UFO accordingly flies
backward.
(4) Rotate control: When moving the RUDD control
ball left, the UFO accordingly rotate left(CCW);
When moving the RUDD control ball right, the
UFO accordingly rotate right(CW).
8.5.2 Gravity sensor control when flying( take sample for mode 1 )
Touch the gravity sensor button on the screen, colorful is ON while gray is OFF. Please refer to below Illustration:
Gravity Sensor key Non Active status Gravity Sensor key Active status
8