Audi 2003 A8 Workshop Manual page 45

♦ Hose clip pliers - VAS 6362-
Removing
Note
All cable ties unfastened or cut open during removal must be re‐
attached in same position when installing.
– With ignition switched off, disconnect earth cable at battery
⇒ page 2 .
– Remove engine cover -arrows-.
– Remove cover over coolant expansion tank -arrows-.
WARNING
Hot steam/hot coolant may escape when opening coolant ex‐
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
pansion tank. Cover cap with cloth and open carefully.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Open filler cap for coolant expansion tank.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
3. Removing and installing alternator
35