Audi 2003 A8 Workshop Manual page 102

Audi A8 2003 ➤
Electrical system - Edition 08.2014
– Remove air intake hose (left-side) -arrows-.
Rest-of-the-world vehicles:
– Detach vacuum line -2- at air intake hose.
– Detach crankcase breather hose -1- from air intake hose
(press release tabs).
– Release hose clips -arrows- and pull off air intake hose.
USA vehicles:
– Detach vacuum line -2- at air intake hose.
– Release hose clips -arrows- and move air intake hose clear to
one side.
Caution
Do not open hose connection -1- on USA vehicles.
All vehicles (continued):
– Detach vacuum hose -1- from intake manifold.
– Unscrew bolts -arrows- and detach air duct system.
– Remove electrical connectors -2- from retainer.
– Unplug electrical connector -1- at coolant temperature sender
- G62- .
Install in reverse order.
92
Rep. gr.90 - Gauges, instruments
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.