Troubleshooting - Roksan Audio K3 Manual

Hide thumbs Also See for K3:

Table of Contents

Pressing the Time Button (8) on the front panel repeatedly will cycle the display

through the following modes:

Normal:

Indicates track No. and how long it has been playing.

First Press: Indicates track No. and remaining time on the track.

Second Press: Indicates number of tracks and remaining time on the disc.

There are two repeat functions available on your CD player:

1. To repeat all tracks on the disc press Repeat Button in the CD

section of the R7 remote (bottom left button). The display will

show 'ALL'.

2. To repeat one track press the Repeat Button twice. The

display will show 'ONE'.

If you suspect your ROKSAN K3 CD Player is not operating properly, ﬁrst check

all the connections carefully. Pay particular attention to input and output

connections. Phono plugs should be fully inserted- a frequent cause of

problems is that Phono plug surrounds do not make proper contact. On the

next page are some commonly encountered problems with suggestions for

possible cure. The list is not exhaustive: If you have any unresolved problems,

please consult ROKSAN or your appointed ROKSAN dealer or distributor.

Display

Repeat

Troubleshooting

Roksan Audio Ltd

CLASSIFICATION: General Use

All speciﬁcations are liable to change without notice. E&OE

Table of Contents