Roksan Audio K3 Manual page 14

!
!
!
!
SYMPTOM LIKELY CAUSE
The disc tray will
Disc not placed properly in
not close when a
tray Disc is warped
disc is inserted
Disc inserts,
Disc inserted upside down
display does not
Disc is dirty or scratched
show the number
Condensation on the laser
of tracks and
lens Dirt on the laser lens
playing time
Skipping & Excessive vibration
mistracking Disc is dirty or scratched
Programme play Programming accidentally
inoperative erased
Excessive hum Connection loose, cable faulty
One channel
Interconnect or amplifier faulty
inoperative
Batteries weak or wrongly
inserted Handset signal path is
Remote handset
obstructed Handset
operation erratic
transmission angle too wide
or not working
Room lighting/sunlight
excessive
!
!
14
Roksan Audio Ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
SUGGESTED REMEDY
Re-place disc properly
Discard disc
Re-insert disc label side
up
Clean disc, discard
scratched disc
Let CD player warm up
and dry out lens Refer to
appointed dealer or
service centre DO NOT
use CD lens cleaners
Ensure player is stable
and vibration-free Clean
disc, discard scratched
disc
Re-programme memory
Re-connect plugs,
change interconnect
Change lead, try another
line input on amp
Replace batteries,
observe polarity Remove
obstruction, move
handset Operate handset
in front of CD Player
Darken room