PAIRING A RECEIVER TO MULTIPLE TRANSMITTERS
1. Make sure you have all of
your transmitters handy and
in a line, ready to be paired
to the one receiver.
2. Slide the receiver's
battery compartment
cover towards the rear
for removal and turn the
receiver on.
3. Press the recessed
transmitter code set button
on the receiver. Use a pin-
like object that will fit into
the recessed hole.
4. After pressing the button,
the status indicator light
will blink repeatedly for
5 seconds. This signals
that the receiver is in
pairing mode and is ready
to receive a transmitter's
21