Pairing The Transmitter To Multiple Receivers - Vello freewave User Manual

PAIRING THE TRANSMITTER TO MULTIPLE RECEIVERS

Note: Repeat these steps, one at
a time, for each receiver that will
be paired with your transmitter.
There is no limit as to how many
receivers can be paired to one
transmitter.
1. Slide each receiver's battery
compartment cover toward
the rear for removal and
turn the receivers on.
18
2. Press the recessed
transmitter code set button
on the first receiver. Use a
pin-like object that will fit
into the recessed hole.
3. After pressing the button,
the status indicator light
will blink repeatedly for
5 seconds. This signals
that the receiver is in
pairing mode and ready to