Vello freewave User Manual page 23

7. The transmitters and
receiver should be paired
at this time. Press each
transmitter's pairing/
test button and watch
the indicator light on the
receiver for one quick blink.
8. Reattach the battery
compartment cover for
each receiver.
9. Have your flash unit turned
off and attach it to the
receiver.
10. Turn the flash on and press
the pairing/test button on
each transmitter. Each of
the transmitters should fire
the flash unit.
Note: A receiver can store up to
5 transmitter codes. Each time
a receiver enters pairing mode
and a new Transmitter's code is
stored, it will delete all previously
stored codes.
23