Vello freewave User Manual page 19

receive the transmitter's
code. After 5 seconds, the
receiver will exit pairing
mode.
4. Press the pairing/test button
on the transmitter. The
receiver's status indicator
light will blink twice, and
then continue to blink
repeatedly for up to 5
seconds.
5. Both the transmitter
and the receiver should
now be paired. To verify
communication, press the
transmitter's pairing/test
button. The indicator light
on the receiver will register
one quick blink.
6. Repeat steps 1-5 for each
receiver.
19