Symbol LS 1006 Product Reference Manual page 51

Programming the LS 1006
Set Lengths for Code 39
Select one or two lengths for Code 39. If you set both length 1 and length 2 to 0, the scanner
can read any length within 45 characters. We recommend that you set Code 39 modulo 43
check to enabled when you set both length 1 and length 2 to 0. If any default setting is in
effect and is an appropriate length, it need not be reset. Length 1 may range from 00-45 and
length 2 may range from 00-45.
Code 39 Length 1
Code 39 Length 2
Within Range for Code 39
This option allows you to decode a code type within a specified range. Set MIN Length and
MAX Lengths for Code 39. For example, to decode Code 39 symbols containing between 4
and 12 characters, set MIN Length to 04 and MAX Length to 12. If you set both MIN and
MAX Length to 0, the scanner can read any length within 45 characters. We recommend that
you set the Code 39 modulo 43 check to enabled when you set both Length 1 and Length 2
to 0. If any default setting is in effect and is an appropriate length, it need not be reset. Length
1 may range from 00-45 and Length 2 may range from 00-45.
Code 39 MIN Length
Code 39 MAX Length
4-23