Programming the LS 1006
Code 93
Enable/Disable Code 93
Enable Code 93
Disable Code 93
Set Lengths for Code 93
Select one or two lengths for Code 93. If you set both Length 1 and 2 to 0, the scanner reads
any length within 55 characters. If any default setting is in effect and is an appropriate length,
it need not be reset. Both Length 1 and Length 2 may range from 00-55.
Code 93 Length 2
Code 93 Length 1
Within Range for Code 93
This option allows you to decode a code type within a specified range. Set MIN Length and
MAX lengths for Code 93. For example, to decode Code 93 symbols containing between 4
and 12 characters, set MIN Length to 04 and MAX to 12. If you set both MIN Length and
MAX Length to 0, the scanner can read any length within 55 characters. If any default setting
is in effect and is an appropriate length, it need not be reset. Length 1 and Length 2 may range
from 00-55.
Code 93 MAX Length
Code 93 MIN Length
4-27