Ls 1006 Technical Specifications; Ls 1006 Decode Zone - Symbol LS 1006 Product Reference Manual

LS 1006 Product Reference Guide
If scanned data is incorrectly displayed on the terminal:
Make sure the system is programmed for the correct keyboard type.
•
Make sure the CAPS LOCK key is off.
•
Be sure the proper host is selected.
•
Be sure editing options (e.g., UPC-E to UPC-A Conversion) are properly
•
programmed.
If after performing these checks the symbol still does not scan, contact your distributor or call
the Symbol Support Center. See page viii for the telephone number.
LS 1006 T echnical Specifications

LS 1006 Decode Zone

3-4
Scanner
5.0 mil
1.0 2.3
7.5 mil
5.0
0
13 mil
20 mil minimum element width
2.0
In.
5
0
Cm. 12.7
0
Depth of Field in Inches/Centimeters
Depth of field as a function of minimum element width.
Figure 3-1. LS 1006 Decode Zone
In. Cm.
10 25.4
5 12.7
0 0
5 12.7
10 25.4
9.0
15.0
15
10
38.1
25.4