Table of Contents
Advertisement
This chapter outlines the technical specifications of the SE-923-I00A scan engine. Decode
zone, flex cable information, electrical pin-outs, and accessories are also presented.
SE-923 Technical Specifications
Item
Power Requirements
Input Voltage
Input Current
Standby Current
Surge Current
V
Noise Level
cc
Scan Repetition Rate
Laser Power
Laser Class
Print Contrast
Scan Angle
Decode Depth of Field
Chapter 3
SE-923-I000A Specifications
Table 3-1. T echnical Specifications @ 23°C
3.3 - 5.0 V DC ±10%
68 mA @ 3.3V DC
78 mA @ 5.0V DC
< 35 µA typical; 50 µA max. @ 5VDC
<200 mA typical
100 mV pk - pk (30 Hz - 50 kHz)
39 (± 3) scans/sec (bidirectional)
1.2 mW nominal - Scanning Mode
0.8 mW nominal - Aim Mode
Intended use in CDRH/IEC Class 2 devices
minimum 25% absolute dark/light reflectance measured at 650
nm.
53° (typical)
See Figure 3-2 on page 3-4.
Description
3-1
Advertisement
Table of Contents
