Unpacking - Bel Canto SETi 40 User's Manual And Operating Information

Unpacking

Unpacking
The box containing your SETi 40 contains the
following parts:
1 - SETi 40 User's Guide
1 - Power Cable for connection to utility power
[6' 7" - 2 meters long]
1 - SETi 40 audio power amplifier
2 - 845 power triodes in a protective box, these
tubes may be shipped in a separate shipping
container.
4 – 12 AX 7 driver tubes
1 - Bel Canto Owner's Warranty & Registration
Card
This power amplifier, like any electrical component, can be dangerous and cause injury unless
correct handling procedures are observed and used. Before powering this power amplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Do not open up your SETi 40 (do not remove the chassis covers). There are no user serviceable
parts inside. Any tampering of internal parts will immediately void your warranty.
Immediately complete and mail the Owner's Registration Card in order to activate your warranty.
Page 4
Warning
Do not connect power to this amplifier yet!
Carefully unpack each piece and check for
shipping damage. If there is any damage, please
contact your dealer or Bel Canto Design, Ltd.
Save all packing materials as the packing is
specially designed to protect the amplifier during
shipping or transporting. If you lose or damage
the packing materials or carton, please contact
your dealer or distributor before attempting to
transport the amplifiers.
The SETi 40 power supply is preset for the
proper national voltages before you receive it.
The power cable will have the correct plug for
your local power system. If you believe this is
not true, please contact your dealer
immediately. Do not attempt to alter or
change power settings yourself!
!
SETi 40
Owner's Manual