Specifications - Bel Canto SETi 40 User's Manual And Operating Information

SETi40 Specifications
Continuous power output into 4 or 8 ohms • 37 watts
Peak power output • >70 watts
Bandwidth • -3 dB 6 Hz - 35 kHz
Class of operation • Class A single-ended 845 triode
Input level for 37 watts output • 1.5 V rms
Signal to Noise Ratio re 1 watt out • 96 dB A weighted
Distortion at 1 watt / 1 kHz • <0.1% predominantly 2nd harmonic
Damping Factor • 3 across full bandwidth
Output Impedance = 1.5 @ 4ohms – 2.5 @ 8ohms
Input configuration and impedance • 100K ohm single ended RCA
Gain at 8 ohm tap • 21 dB
Power Requirement • 110-120 / 220-240 VAC; 50-60 Hz • 400 VA
*Voltage settings are made at our facility to correspond to requirements of the country in which the
product is shipped.
Size • 19.5" W x 15" D x 11" H (496 mm x 381 mm x 280 mm)
Weight • 64 lbs. (29 kg)
SETi 40
Page 10 Owner's Manual