Download Print this page

Unpacking - Bel Canto orfeo 60 User's Manual And Operating Information

Single-ended balanced 845 triode monobloc power amplifier

Advertisement

Unpacking

Unpacking
Each box containing your Orfeo 60 contains
the following parts:
1 - Orfeo 60 User's Guide
1 - Power Cable for connection to utility
power [6' 7" - 2 meters long]
1 - Orfeo 60 audio power amplifier
2 - 845 power triodes in a protective box,
these tubes may be shipped in a separate
shipping container.
1 - Bel Canto Owner's Warranty &
Registration Card
This power amplifier, like any electrical component, can be dangerous and cause injury unless cor
rect handling procedures are observed and used. Before powering this power amplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Do not open up your Orfeo 60 (do not remove the chassis covers). There are no user serviceable
parts inside. Any tampering of internal parts will immediately void your warranty.
Complete and mail the Owner's Registration Card immediately in order to activate your warranty.
Page 4
Warning
Do not connect power to this amplifier yet!
Carefully unpack each piece and check for
shipping damage. If there is any damage,
please contact your dealer or Bel Canto
Design, Ltd. Save all packing materials as the
packing is specially designed to protect the
amplifier during shipping or transporting. If you
lose or damage the packing materials or carton,
please contact your dealer or distributor before
attempting to transport the amplifiers.
The Orfeo 60 power supply is preset for the
proper national voltages before you receive
it. The power cable will have the correct
plug for your local power system. If you
believe this is not true, please contact your
dealer immediately. Do not attempt to alter
or change power settings yourself!
Orfeo 60
Owner's Manual

Advertisement

loading